The Exposure Triangle – Learn More About It

If you are interested to learn more about exposure or if you are keen to know about the right way of experimenting with your digital camera’s manual settings or how to use its Auto Mode, then you should learn about the main three elements to consider, which are collectively called the exposure triangle. Every one of these elements relates to light and the way it penetrates and interacts with your camera. These elements are; ISO, Aperture and Shutter Speed. Many of these elements can even enable you to take bird photography with smart phone, sometimes it takes additional tools but knowing the this triangle will help you accomplish it.

ISO is defined as the digital camera sensor’s measure of its sensitivity to light. The Aperture is the size of the lens opening when a shot is taken. Lastly, the camera’s shutter speed is the measurement of the time the shutter is open.

The image’s exposure is effectively worked at these elements’ intersection. Therefore, it is important to understand that any change in any one of these three elements will surely have an effect on the other elements. It simply means that you should never isolate a single element; rather you should always put all three into consideration, at all times.

Three Symbols for Understanding the Exposure Triangle of Digital Photography

A lot of people define the connection between these three elements with the use of symbols or metaphors for better understanding. Here are three metaphors:

The Window

To understand this symbol, you should try to imagine your digital camera as a window with its Shutter opening and closing.

The Aperture is the windows size. A bigger size is going to allow more light making the room perfectly brighter.

The amount of time that your window’s shutters are open is the Shutter Speed. The longer amount of time they are left open, the more light is going to enter.

Think of yourself inside the room and you have sunglasses on. Let’s say your eyes are desensitized, this could mean low ISO. To increase the amount of light penetrating the room, what you need to do is to increase the amount of time that the shutters are open; meaning the shutter speed should be decreased. You can also open the window more, which is similar to increasing the aperture, or you can also simply take your sunglasses off, equivalent to making higher ISO.

Sunbaking

This is the second metaphor, wherein you can imagine the exposure of your digital camera as if you are getting tanned by the sun. You can think of your skin type as ISO rating.

Shutter speed can be deemed as the length of time that you are spending out in the open. The more time you are exposed in the sun, the more chances that you will get a tan; don’t just spend too much time if you don’t want to be over-exposed.

The sunscreen that you are applying to your skin is the Aperture. The main purpose of a sunscreen is to block out the sun at various levels depending on the lotion’s strength. If you use a high strength suntan lotion, then you lessen the amount of sunlight penetrating through your skin. This is ideal for people with sensitive skin.  Using a lower strength sunscreen lotion can be compared to slowing down of the shutter speed and/or decreasing the ISO.

Garden Hose

This third metaphor illustrates the aperture as the hose’s width, the shutter speed is the length of the time that the hose is left on, and the ISO is the water pressure as it goes through the hose.

Understand them All Together

It may take some practice to master the art of exposure. But if you are decided to know that you can be a highly experienced photographer in no time at all. All it takes is a little vigilance, some amount of perseverance and a whole lot of experimenting and tweaking on your camera’s settings.

The best thing about a digital camera is that it can be the perfect trial tool for learning more about exposure. It is safe to take as many shots as you want for free. It also can be used for shooting in Auto and manual mode.

Photo Credit: Sadie Hernandez

Weathering the Insurance Claims Process of an Auto Accident

To successfully file an auto accident claim with your insurance company, you should first understand the process so that you are not shorted anything that you are entitled to. These claims can be filed by both the passenger and the driver of any car, in any collision. Knowing how the process works prior to calling your insurance company will give you a leg-up and will help ensure that things get taken care of the way they need to be taken care of.

The first step is to call the insurance company to report the claim. Let them know that you have been in an accident. The insurance company will ask many questions so that they can understand all the details of the accident before they get started processing your claim. Keep in mind that the call is recorded. You may not yet know the extent of your property damage, nor may you know the extent of your injuries. With that in mind, do not say anything that will jeopardize your claim down the road. Just stick to the basic facts, be honest, and don’t sell yourself short.
Taxi in accident on Aurora Avenue, 1962
Photo Credit: Seattle Municipal Archives

  • Helpful Tip: If you are at all unsure about how to report your claim, or you feel that you might be injured. Consult with an experienced car accident attorney before filing your claim. He or she will give you a free consultation, and will help you figure out the next step.

Once you have made the big phone call to your insurance claims department, the next step will be to speak with an accident claims adjustor. Your insurance company will assign one to your claim. He or she will review your insurance policy, determine your coverage, your deductible, and then start the process of valuing your claim. They will do this by first looking at your property damage.

Your claims adjustor may recommend a body shop where you should go to get your estimate, you are not required to use their recommended shop, but it may make the process a bit simpler for you. You are also not required to make the repair, after you go to the body shop, get an estimate, and give it to your insurance claims adjustor, he or she will write you a check. You could simply choose to leave the damage on your vehicle and pocket the cash. This is assuming, however, that your vehicle can still pass inspection with the damage it received from your car crash.

The next step after property damage is an amount for bodily injuries to you, or anyone else in the car with you. If you have reached this step in the process, it is extremely likely that you need a personal injury attorney. Your insurance company will likely offer to pay your medical bills for you if they are low amounts. In fact, in St. George, Utah, state law requires that your own insurance company will pay your first three thousand dollars in medical expenses even when the accident was not your fault.

Determining fault can be the most complicated part of an auto insurance claim. Always get a police report filled out at the scene of the accident. This will make determining fault easier because you will have a report from a neutral third party. Don’t allow the other driver to decide to later change his or her story. If fault is an issue, a car accident attorney is a must for you. Remember; never sign any documents from the insurance company until you have consulted with your attorney. He is there is make sure that you are not taken advantage of while you are doing your best to recover from a car accident.
This article is offered only for general information and educational purposes.  It is not offered as and does not constitute legal advice or legal opinion.  You should not act or rely on any information contained in this article without first seeking the advice of an attorney.    

 

What is POP?

POP, for its acronym “Point of Purchase” (POP).

Then a point of purchase software is one with which you conduct transactions and payment information from customers in the buying / selling goods, products and services. These data can be obtained using different devices. In our case it will be through a computer, but can also be made through cash registers, barcode scanners, PIN pads and card readers.

 

DVD player + 4.3" TFT LCD + Touch Screen + Bluetooth + RDS + TV

What are the components of a POP?

 

Point of Purchase Software

This is the system responsible for conducting all sales process from capture of products in its database, the information read by external devices, issue purchase vouchers, issuing monthly reports among many other functions.

 

Scanners

This is the device that interprets the information encoded in a bar code and transforms it into information the computer can process.

 

Receipt Printer

It is one of the essential components for a point of sale, is in charge of issuing sales receipts, voucher and reports as are court case and more.

 

Touch -Screen Monitor

It is a device that allows the user to visually interact with the computer and software in real time, following processes to complete a sale or enter information into the system. The Touch Screen Monitors facilitate the use of a point of sale to replace the traditional mouse or “Mouse” of direct -sensitive computer screen. If you need a Touch screen Monitor choose between different brands that offer leading manufacturer Elo, 3M and Gvision.

 

Magnetic Stripe Readers

Magnetic stripe cards are used today by banks, department stores, clubs and more. This kit is used to convert the information encoded in the magnetic stripe and so transform it into useful information for the system and affect a common database to deduct the purchase amount in a supermarket, add funds to cards, among other applications more.

 

CPU Cabinet

Is one of the core parts because this is integrated in the operating system and the POS system used in sales? It is composed of the motherboard, hard drive, memory, CD drive, optionally some other accessories such as network cards, etc.

 

Point of Sale System Figures Assembled

Are those in which the client preferred weapon to full features of the same? You can use a regular computer to do the function of adding further point of sale, cash drawer, scanner, magnetic card reader and some cases according to customer needs Touch Screen monitor. Represents a customer advantage acquiring these types of point of sale as the cost is lower but its major drawback is the large space it occupies.

 

 

 

 

How to Protect Against House Fires

The electrical cables must not pass over radiators or pipes. Do not touch electrical appliances when you find one in the tub, standing on a wet floor (like laundry) or with wet hands. Electrical cables must not run in the swing of the doors or under the carpets, as the constant opening and closing of the first and the second walk on, will damage the insulating material. As we were looking for fire extinguishers Nevada we learned of the importance of proper insulating material and other useful tips to protect again house fires. We also learned how new home technology has increase the amount of fire protection offered dramatically.

Electrical equipment should be placed in appropriate contacts. There are fake plugs that can be placed in electrical outlets, but should not be used to prevent children’s curiosity and crawling babies. These plugs do not disconnect by pulling the cord from the socket. An electric iron should never be connected, even for a single moment, without being duly observed. Lamps, electrical appliances, extension cords and wires cores must bear a label stating they were inspected by authorities.

Desert Hills Home Tour - 03/14/2008

The wires with the insulation worn or cracked should be renewed. Some causes of this attrition are rubbing against sharp edges of furniture or when wires twist and tug. Repairs or placement of electrical wires in the home require the attention of specialists in it, not a job that any amateur can do. They cleaned all debris that may have accumulated in basements, closets, garages, attics or storage elsewhere.

In addition to being alert to the dangers of electricity, the whole family must form the habit of controlling risks such as representing fire. This should include the following:

  • Ensure that cigarette butts have been well off, empty the ashtrays regularly and do not smoke in bed or when you’re too tired. Cigarettes and matches are one of the first things to cause fires.
  • Always leave the matches out of the reach of children.
  • Remove all fuel soaked rags that are in the corner of a closet or garage.
  • Do not leave garbage or trash in places near a boiler or heater.
  • Store flammable liquids (gasoline, oil, paint, etc..) Preferably on the outside of the house, away from flames or hot something because its gases are often flammable.
  • All items easily combustible (paper, cloth, leaves and firewood should be stored away from heat and ignition sources (such as heaters, fireplaces, furnaces, stoves and electrical equipment).
  • Electric appliances, such as irons, which retain heat even if they have been disconnected, shall be handled and stored with special care. torches, welders and other similar items must be stored on nonflammable shelves, and it is essential to have a good fire extinguisher near such tools if there is a ignition control.
  • Any fire that is lit with a certain purpose should be kept away from buildings or into suitable containers.
  • Children should learn early that must be prudently away from space heaters and fire.
  • Adults should set an example in this and protect themselves, avoiding direct contact with the heaters and fire whenever possible.
  • It is advisable that the houses have proper equipment to fight the fire, as fire extinguishers, several hoses in strategic places, if it possible, also first-aid material.

Photo Credit: Ben Freedman

Fireproofing Your Home

Since the heat and fire are essential in everyday life to heat the house, cooking, and entertaining, special attention should be given daily to the risks involved in the use of fire. Among the most dangerous and important elements to be taken into account include: equipment and defective electrical wiring, smoking habits and the misuse of the matches, the operation of the heating equipment, proper maintenance of the stoves oil, the spontaneous ignition of garbage, the inappropriate use of flammable liquids, hot ash and putting fuel in places close to the heaters. We saw first hand the danger of hot ash and heaters when looking for fire extinguisher products Las Vegas, we were shown how dangerous it can be. We were also taught how the extinguisher and home improvement technology has grown immensely allowing for a dramatic decrease in the amount of fire deaths per year.

Southern Home

The fires in electrical installations may be the result of an overloaded circuits, faulty wiring, poorly insulated material, defective switches and the misuse of electrical appliances. Besides causing burns and start fires, electricity is not managed properly can cause concussions and even death as a result of strong discharges of electrical installation. In older homes the installation should be checked as the modern electrical demand greater current load. Overloading a circuit can cause it to overheat, which is often the result of using it for too many lamps, motors or other items. The heat that is produced by this overload may cause a fire. Even when the current is not excessive, there may be dangerous heat that may cause a spark, or sometimes because the electrical connections are loose or poorly made. The fuse is considered safer the circuit breaker. Use a coin instead of a fuse or fuses is a common and very dangerous habit.

 

To dramatize the danger that can represent a careless attitude towards electricity at home, here’s an example: A three year old girl was left alone for a few minutes at the dinner table and introduced a fork in the toaster to remove a slice; she placed  her other hand on the counter – which was wet on the outside of the toaster (metal and thus excellent electrical conductor), shortly after they found the small girl completely unconscious because of burns and electric shock and, despite having been attended to immediately, her life could not save saved. Such misfortunes can be avoided if parents take into account better safety measures for their children and homes.

Photo Credit: The Well Tempered Theodore

Are You Required to Engage in Arbitration After an Auto Accident Injury?

Arbitration is not something that is required in any auto accident case. It is however a nice alternative to formal litigation when the two parties just cannot agree on a settlement amount. It is a very common form of what is referred to as alternative dispute resolution. Mediation is the other common form of alternative dispute resolution. Arbitration is more formal than mediation, but less formal than trial. Its processes are similar to that of an actual trial. In Utah, state statute provides that a plaintiff’s attorney can request arbitration during any litigation process where the amount at issue is less than $50,000. The time frame that this must be done is either within the initial complaint or within two weeks after the defendant files an answer. The rationale for this law is that cases of relatively small value should be handled relatively quicker than large cases with more at stake. Defense counsel could potentially block arbitration by opposing the plaintiff’s motion, but this is not typical.

In effect, arbitration functions much like trial. Its decision is binding unless appealed. The way is works is that both parties would agree on and then pay an arbitrator to hear their case. An arbitrator is typically a former judge or experienced attorney. You will want an arbitrator that is intimately familiar with the type of case at issue. There are many arbitrators in Utah with extensive experience in car crash cases.

New Vue
Photo Credit: RBerteig

The procedure of arbitration begins with opening statements from each side. Followed by examination and cross-examination of witnesses by each side. Both sides can introduce evidence, and finally, both sides will be allowed to make closing arguments. Sometimes the arbitrator may even ask questions of counsel or of one of the witnesses. After the arbitration is over, the arbitrator will respond with an order usually within a week or so. This order has the force of the law and will be followed unless either party chooses to appeal the award by motioning for a de novo review at trial. That basically means that the parties would go to trial and pretend that the arbitration never happened. That seems silly though, right? It is. The intention of arbitration is to save time and resources, when they are appealed, extra time and resources are wasted. For that reason, there is a penalty for appealing an arbitration award. The moving party is required to get either a 30% decrease or increase of the award at trial or that party will be required to pay the attorney fees of the nonmoving party up to $6,000.

An experienced personal injury attorney may recommend arbitration in a case where a reasonable settlement amount just cannot be reached. When the parties are so far apart and both feel that they are right, arbitration or trial may be inevitable. A good car crash attorney knows that the more it costs to litigate your claim, the less the victim will get. Sometimes arbitration gets a bad rap because there are not many big winners or losers. Arbitrators get a reputation of just splitting an amount down the middle. The middle, however, is better than nothing. There is some concern that arbitrators favor defendants because they want to be rehired. That is a legitimate concern, and it is one that you must weigh out with the help of your attorney.

This article is offered only for general information and educational purposes.  It is not offered as and does not constitute legal advice or legal opinion.  You should not act or rely on any information contained in this article without first seeking the advice of an attorney.  

Information About Sperm – Health Technology

What technology has taught us about sperm. Recently my wife and I visited an egg bank to try and solve our infertility issues, when there the doctor taught us many things, things that have only been learned because of recent advancements in the area of health technology. I hope with more research that more can be done for those who would like to have a child but cannot.

Eggs 'n' Chips

But as we talked I found out that I am the problem, an he proceeded to teach me some interesting things about sperm that I’m going to share right now:

* 90% of the seeds, which the man ejaculates are deformed. Scientists call this the Price of monogamy. If more are missing, the giver of life is lax.

* Each sperm carries a “hat”, a so-called Acrosom that brings the outer shell of the female ice to melt.

* A single testicle is enough to bear children. U.S. cyclist Lance Armstrong lost a testicle to cancer. After that, he was a father of five.

* Men produced a lifetime of sperm. The sperm may be lax with age, but the factory has no curfew.

* If all – ejaculated from the man in a life – sperm were lined up, a ten-meter long cord would be created.

Dead sperm, vibrant babies

* Dead sperm can make living babies. All that matters is the presence of the DNA.

* More than half of all sperm can not just go. They move in a circle. But there is always one that it creates.

* The Y chromosome of a man is identical with that of his father. It is a historical archive, though otherwise little use. But at least we know the fact that in Central Asia today many millions of descendants of Genghis Khan are known.

* The scrotum is a refrigerator. The testes are 7 degrees Celsius cooler than the human body go. That they must also stay that way, otherwise it threatens infertility.

* Sperm need protection . At first they look like any other cell in the body. But as soon as they leave the testis, they have half the DNA of other cells. This makes the immune system suspicious. In order to prevent immune cells from attacking the sperm, the testicles send other sperm to protect the sperm, a “Bodyguard” of sorts on the trip.

Photo Credit: Rusty Marvin (Dreaming of…

Fertile Times: natural helper for would-be fathers

How on this portal already treated many cases, the man’s sperm count has dropped over the past 80 years worldwide by over 50%. This is true of East and West and the rest of the directions. So if you’re looking for health technology to solve this problem, it has arrived in two fold. In fact these kind of problems have arisen to many people utilizing a newer technology that facilitate and enables egg donors.

In the 40s the average healthy young man has produced over 100 million sperm per milliliter of semen – well above the 40 million sperm cells, which are generally considered a measure of the “predicate fruitful”. The studies of the recent past indicate a worrying trend: More and more men fall below this level .

To all the responsible medical factors to solve, it would take multiple medications. There are also natural ways to the sperm quality improve. There are nutrients that make substantial contributions to this end. Below are some highly effective examples.

Corporate Image

No more subterfuge

*Carnitine. sperms are the major long-distance travelers among the human cells. This requires energy. Therefore, carnitine as a vital nutrient for men with poor sperm quality. Carnitine is a transporter molecule, the high-energy fats into the mitochondria contributes, where they are burned to rekindle their energy. This gives the sperm those “boost” they need to penetrate the egg. The human body takes carnitine mainly on (red) meat, especially lamb.

*Antioxidants Because sperm consume so much energy that they generate oxidation – which can damage cell membranes and THEN molecules. That means they need antioxidants – best a cocktail of vitamins and micronutrients.

* Lycopene is a carotenoid vegetable, that the tomato, watermelon and other fruits get their color. It has excellent antioxidant qualities, the effect is extraordinary.

* Omega-3 fatty acids. Apart from their trip drive also need sperm membrane-specific characteristics in order to merge with the egg can. Qualities which bring excellent especially omega-3 fatty acids. Where to find them? For example, in Walnut.

* Vitamin D . Lack of this (sun) vitamin affects the sperm quality fatal consequences.

These are just some of the things you can do to affect your sperm for the positive. We’re lucky to live in a time when the technology for health affords us the opportunity to know what the cause of our problems are, and some potential solutions to them as well.

Photo Credit: Edd Carlile

Social Freezing. Career or children? Yes!

Career or children? This question arises every person in the course of life, in a man traditionally less (although recently more frequently, see trend towards single father ), women generally more often, even if without urgency of today’s report. In the era of the promotional hungry ego individualism, on the barometer stands on career advantage, supported by a generation, says Dr Richard Shapiro,” which has never given a thought to marriage or having children.” Due to recent technological advances there may be a solution though.

100903_FoundryGroup"Mad Men"_131

A possibility of children is not completely excluded from him, but if so maybe later. In fact, much later. According to the Mirror quoted survey of women found that the “ideal” age for 43.4 years. Which is of course far from ideal.

The problems of this are manifold. The highest fertility of the female egg is at the age of 25 at the zenith and then gradually drops off. The biological clock has its expiry date, and also sometimes come premature menopause. Social factors play with, children are considered career breakers, relationships go into fractures, the single life dominated, many women say that they have to have the “right” man for the purpose of family planning.

What is Social Freezing?

A technological solution has arisen, the question of “career or kids” decreases more in the recent years due to this newest trend: Social Freezing. It refers to the rapid freezing of one’s eggs, done when the woman is in the prime of fertility. After hormone stimulation, in which the body is made ​​to produce as many eggs as possible, these are then removed and stored in nitrogen at minus 196 degrees. (the technical term: cryopreservation).

Thus, the eggs are ready and available when the time is right; when they then take the partner’s sperm to fertilize the egg cells in test tubes.

The health is as risky as it sounds, multiple pregnancy is feasible, ethical and legal questions have been raised (eg: How long can eggs be lifted?). Moreover, it can be a little more than some are willing to spend as egg freezing costs are not like going to Walmart to buy some milk. The storage of the eggs also costs money per year as well, then the artificial insemination when you’re ready is an additional cost.

Yet surprisingly, many women are interested in this method. According to the survey of the Leeds Centre for Reproductive Medicine interviewed just 200 students, and 86% of young women said that they wanted to wait to be pregnant later in life, for four out of five of those surveyed said social freezing was an acceptable way.

For the financial cost one way seems to offer. According to Dr. Shapiro, above it is the parents of the late pregnancy willing to offer financial support because they do not want to be deprived of the enjoyment of grandparenthood.

Social Freezing so – not cheap, not without risk … and for women in fashion. What remains, therefore, a junior man willing to do other than the best of a delayed match and to ensure , in the case of the case fertile to be?

Photo Credit: Scott Cejka